Graphics Card (again)
Moderator: Forum Moderators
-
The Incredible...
- Sir Didymus

- Posts: 354
- Joined: December 9th, 2006, 1:12
Graphics Card (again)
Just got the sapphire ati radeon x1950 pro agp gubbins card
it has 2 molex connectors, presumably this means both need to be connected to the power supply
if so what is the correct way to connect it up
the instruction manual is a bit vague
it has 2 molex connectors, presumably this means both need to be connected to the power supply
if so what is the correct way to connect it up
the instruction manual is a bit vague
-
Dr. kitteny berk
- Morbo

- Posts: 19676
- Joined: December 10th, 2004, 21:53
- Contact:
-
Dr. kitteny berk
- Morbo

- Posts: 19676
- Joined: December 10th, 2004, 21:53
- Contact:
-
ProfHawking
- Zombie

- Posts: 2101
- Joined: February 20th, 2005, 21:31
Before you plug it in please check it properly.
If one is a molex connector and one is a PCI-Express power connector DO NOT plug both in. Check check check, i have seen cards that have been killed in this way.
If they are both identical connectors, then it probably does need both but best to check it anyway.
If one is a molex connector and one is a PCI-Express power connector DO NOT plug both in. Check check check, i have seen cards that have been killed in this way.
If they are both identical connectors, then it probably does need both but best to check it anyway.
-
Woo Elephant Yeah
- Heavy

- Posts: 5433
- Joined: October 10th, 2004, 17:36
- Location: Bristol, UK
- Contact:
-
The Incredible...
- Sir Didymus

- Posts: 354
- Joined: December 9th, 2006, 1:12
-
FatherJack
- Site Owner

- Posts: 9597
- Joined: May 16th, 2005, 15:31
- Location: Coventry, UK
- Contact:
-
FatherJack
- Site Owner

- Posts: 9597
- Joined: May 16th, 2005, 15:31
- Location: Coventry, UK
- Contact:

