SLA Industries: Binary Soul
Moderator: Forum Moderators
-
deject
- Berk

- Posts: 10353
- Joined: December 7th, 2004, 17:02
- Location: Oklahoma City, OK, USA
- Contact:
Re: SLA Industries: Binary Soul
Let's try the door then.
-
Roman Totale
- Robotic Bumlord

- Posts: 8475
- Joined: October 24th, 2004, 0:27
- Location: Manchester, UK
Re: SLA Industries: Binary Soul
Ghosts. It's definitely ghosts.
Did anyone bring a proton pack?
Did anyone bring a proton pack?
-
The Shutting Downs
- Ninja Pirate

- Posts: 1520
- Joined: December 3rd, 2008, 21:36
- Location: Derby
Re: SLA Industries: Binary Soul
Nope, only Grenades
Re: SLA Industries: Binary Soul
The door's rusted shut like the last one. This one seems a lot less decayed though (it isn't directly in the rain), and so a lot more sturdy.
-
The Shutting Downs
- Ninja Pirate

- Posts: 1520
- Joined: December 3rd, 2008, 21:36
- Location: Derby
Re: SLA Industries: Binary Soul
Stormer Key time!
Strength 17:
Roll(2d10)+17:
9,1,+17
Total:27
Strength 17:
Roll(2d10)+17:
9,1,+17
Total:27
Re: SLA Industries: Binary Soul
The impact causes an almighty boom which echoes deep into the factory. The whole frame of the door moves a little and damp concrete crumbles from all around it. You reckon given enough kicks like that the concrete will probably give way and the whole door fall in. Whether your boots survive is another matter.
-
deject
- Berk

- Posts: 10353
- Joined: December 7th, 2004, 17:02
- Location: Oklahoma City, OK, USA
- Contact:
Re: SLA Industries: Binary Soul
Can I get to the other side of the door through one of the holes in the wall?
-
The Shutting Downs
- Ninja Pirate

- Posts: 1520
- Joined: December 3rd, 2008, 21:36
- Location: Derby
Re: SLA Industries: Binary Soul
Eraser wrote:D'ya want me ta keep goin?
I'm sure the boots will be OK, I'm in powercell
Re: SLA Industries: Binary Soul
Easily.deject wrote:Can I get to the other side of the door through one of the holes in the wall?
-
deject
- Berk

- Posts: 10353
- Joined: December 7th, 2004, 17:02
- Location: Oklahoma City, OK, USA
- Contact:
Re: SLA Industries: Binary Soul
I'll hop through and take a look around.Hang on a second Eraser. Let me see if I can get this open from the other side first. I'd rather not collapse this place while we're in it.
Last edited by deject on May 9th, 2012, 21:02, edited 1 time in total.
Re: SLA Industries: Binary Soul
It's pretty easy to slip through the hole, although it would have been even easier if the rollers still worked. It's a bit constrictive on the conveyor line with the overhanging machinery, but you can slide off through the shelves onto the pathway alongside where the door is. It looks in slightly better condition on this side, but it's still pretty rusty. There's a keypad on both sides, neither of which are in any decent state, and a maintenance panel above it.
-
Roman Totale
- Robotic Bumlord

- Posts: 8475
- Joined: October 24th, 2004, 0:27
- Location: Manchester, UK
Re: SLA Industries: Binary Soul
If you need a hand on that side I could port through. Or we could just let Eraser unlock it.
Re: SLA Industries: Binary Soul
You could climb through too. It would be a squeeze for Eraser, but nobody else should have any real trouble.
-
deject
- Berk

- Posts: 10353
- Joined: December 7th, 2004, 17:02
- Location: Oklahoma City, OK, USA
- Contact:
Re: SLA Industries: Binary Soul
I'll open the maintenance panel.
Re: SLA Industries: Binary Soul
It's also rusted shut so it needs quite some persuasion. Inside are the various motors and gears which raise the door. Would you like to make a Mechanics Repair roll?
-
deject
- Berk

- Posts: 10353
- Joined: December 7th, 2004, 17:02
- Location: Oklahoma City, OK, USA
- Contact:
Re: SLA Industries: Binary Soul
Since I actually have that skill, why not?
Mechanics Repair (2): 1, 10 + 2 = 13
Mechanics Repair (2): 1, 10 + 2 = 13
Re: SLA Industries: Binary Soul
The mechanics look dirty and a bit rusty, but you reckon some brute horse might cajole them into working order. There's a ratchet on the rack that it lifts on, so with a bit of tinkering and some more horse you could probably ratchet it open.
Re: SLA Industries: Binary Soul
You also notice a little white noise creeping into your UV vision.
-
Roman Totale
- Robotic Bumlord

- Posts: 8475
- Joined: October 24th, 2004, 0:27
- Location: Manchester, UK
Re: SLA Industries: Binary Soul
I'll squeeze through the gap to be on the side as deej - shit may or may not be going down.
Re: SLA Industries: Binary Soul
It's really not that much of a squeeze, you fit through easily, if awkwardly.
