some crazy stuff about overclocking a pentium D 805

If you touch your software enough does it become hardware?

Moderator: Forum Moderators

Post Reply
cashy
Zombie
Zombie
Posts: 2024
Joined: May 9th, 2005, 19:43
Location: shropshire

some crazy stuff about overclocking a pentium D 805

Post by cashy »

http://www.bit-tech.net/news/2006/05/11 ... on_beater/

Code: Select all

We bought an Intel Pentium D 805 from a local retail outlet and overclocked it up to 4.1 GHz, even though this part runs by default at just 2.66 GHz
OMFGWTFBBQ!

seeing as im still on a 1.2 amd chip i need a newun anyway, this looks too perfect for me. is this too good to be true?
ProfHawking
Zombie
Zombie
Posts: 2101
Joined: February 20th, 2005, 21:31

Post by ProfHawking »

i read this the other day. It is very impressive, but im not sure you will actually get it that high without water/phase cooling.

even so, even if you get it to 3.5ghz then its a bargain
Dr. kitteny berk
Morbo
Morbo
Posts: 19676
Joined: December 10th, 2004, 21:53
Contact:

Post by Dr. kitteny berk »

i expect it's true.

however, i also expect they're chips that've failed at their proper speed and have been underclocked. (a pretty common practice)


it's also pretty likely that THG got very lucky, not to mention the fact you'll need watercooling.
FatherJack
Site Owner
Site Owner
Posts: 9597
Joined: May 16th, 2005, 15:31
Location: Coventry, UK
Contact:

Post by FatherJack »

The article does say that "minimal" extra cooling is needed, and notes that extra power may be required - so if you haven't already got a 500W PSU or a Zalman cooler then it's another 70 or so notes on top of the 80 quid CPU.
Dr. kitteny berk
Morbo
Morbo
Posts: 19676
Joined: December 10th, 2004, 21:53
Contact:

Post by Dr. kitteny berk »

FatherJack wrote:The article does say that "minimal" extra cooling is needed, and notes that extra power may be required - so if you haven't already got a 500W PSU or a Zalman cooler then it's another 70 or so notes on top of the 80 quid CPU.
according to the TGH article, watercooling is/was needed.

meaning another £100 or so.


£250 to make an £80 cpu act like a £250 cpu...
FatherJack
Site Owner
Site Owner
Posts: 9597
Joined: May 16th, 2005, 15:31
Location: Coventry, UK
Contact:

Post by FatherJack »

Dr. kitteny berk wrote:
FatherJack wrote:The article does say that "minimal" extra cooling is needed, and notes that extra power may be required - so if you haven't already got a 500W PSU or a Zalman cooler then it's another 70 or so notes on top of the 80 quid CPU.
according to the TGH article, watercooling is/was needed.

meaning another £100 or so.

£250 to make an £80 cpu act like a £250 cpu...
I kind of got the impression that you needed watercooling to get near the speeds of £700 CPUs, but £250 CPU speeds were attainable without it.

Still nothing's free when it comes to energy, whether it be heat or electricity, as I'm sure Newton would remind us.
Wiggy
5pork
5pork
Posts: 925
Joined: June 12th, 2005, 17:00
Location: Chesterfield, UK

Post by Wiggy »

How easy is overclocking? I've just got a new computer and I'd like to at least try it once. It's an AMD Athlon 64 3700+ San Diego with an Arctic Cooling (AC-FRZ-64P) heatsink.
Dr. kitteny berk
Morbo
Morbo
Posts: 19676
Joined: December 10th, 2004, 21:53
Contact:

Post by Dr. kitteny berk »

dead easy.

Get http://www.cpuid.com/clockgen.php

Put your FSB up by 1, wait a few mins, repeat until your computer crashes.

reboot, use clockgen again to put your FSB up to say, 2 lower than when it crashed. play computer games, use superpi, abuse the computer a bit.


if it stays stable, adjust the FSB in your bios to match what you got using clockgen.

also you can consider upping voltages for your cpu and memory, then try overclocking more
pixie pie
Cheese Lord
Cheese Lord
Posts: 838
Joined: July 30th, 2005, 23:46
Location: Cambridge, UK

Post by pixie pie »

Dr. kitteny berk wrote:also you can consider upping voltages for your cpu and memory, then try overclocking more
This bit adds heat. Be careful. Don't want you breaking anything :)

Edit: If you're planning on breaking anything, film it, show it to us. We'll enjoy it honest.
Chickenz
Optimus Prime
Optimus Prime
Posts: 1155
Joined: December 8th, 2005, 20:06

Post by Chickenz »

google for 'Rivatuner' that lets you oc nvidia cards i believe.
deject
Berk
Berk
Posts: 10353
Joined: December 7th, 2004, 17:02
Location: Oklahoma City, OK, USA
Contact:

Post by deject »

pixie pie wrote:
Dr. kitteny berk wrote:also you can consider upping voltages for your cpu and memory, then try overclocking more
This bit adds heat. Be careful. Don't want you breaking anything :)

Edit: If you're planning on breaking anything, film it, show it to us. We'll enjoy it honest.
A good rule of thumb when playing with voltages is limit up to 10% over the regular voltage.
Dr. kitteny berk
Morbo
Morbo
Posts: 19676
Joined: December 10th, 2004, 21:53
Contact:

Post by Dr. kitteny berk »

deject wrote:
pixie pie wrote:
Dr. kitteny berk wrote:also you can consider upping voltages for your cpu and memory, then try overclocking more
This bit adds heat. Be careful. Don't want you breaking anything :)

Edit: If you're planning on breaking anything, film it, show it to us. We'll enjoy it honest.
A good rule of thumb when playing with voltages is limit up to 10% over the regular voltage.
many mobos won't even allow that much, but i suggest 1-2 settings for safety, more for fun
pixie pie
Cheese Lord
Cheese Lord
Posts: 838
Joined: July 30th, 2005, 23:46
Location: Cambridge, UK

Post by pixie pie »

Dr. kitteny berk wrote:more for fun
Much More for Fireworks Fluffeh kittins
ProfHawking
Zombie
Zombie
Posts: 2101
Joined: February 20th, 2005, 21:31

Post by ProfHawking »

pixie pie wrote:
Much More for Fireworks Fluffeh kittins
More Fluffeh kittins Fireworks! :boogie:
Woo Elephant Yeah
Heavy
Heavy
Posts: 5433
Joined: October 10th, 2004, 17:36
Location: Bristol, UK
Contact:

Post by Woo Elephant Yeah »

Dr. kitteny berk wrote:dead easy.

Get http://www.cpuid.com/clockgen.php

Put your FSB up by 1, wait a few mins, repeat until your computer crashes.

reboot, use clockgen again to put your FSB up to say, 2 lower than when it crashed. play computer games, use superpi, abuse the computer a bit.


if it stays stable, adjust the FSB in your bios to match what you got using clockgen.

also you can consider upping voltages for your cpu and memory, then try overclocking more
Erm how do I do this?

Just fiddled around with this on my Intel Xeon 2.8GHz, but I haven;t a clue how you actually up the FSB through clockgen, or am I missing something?

I've never overclocked, so I'm probably just being stupid.

ON a side note, anybody know where I can get that file that opens up the Nvidia card, and allows you to overclock the card with the built in Nvidia control panel thingy?
Lee
Optimus Prime
Optimus Prime
Posts: 1138
Joined: February 12th, 2005, 16:31
Location: South Shields, UK

Post by Lee »

Woo Elephant Yeah wrote:ON a side note, anybody know where I can get that file that opens up the Nvidia card, and allows you to overclock the card with the built in Nvidia control panel thingy?
http://downloads.guru3d.com/download.php?det=815
Lateralus
Dr Zoidberg
Dr Zoidberg
Posts: 4217
Joined: May 15th, 2005, 15:20

Post by Lateralus »

Woo Elephant Yeah wrote:
Dr. kitteny berk wrote:dead easy.

Get http://www.cpuid.com/clockgen.php

Put your FSB up by 1, wait a few mins, repeat until your computer crashes.

reboot, use clockgen again to put your FSB up to say, 2 lower than when it crashed. play computer games, use superpi, abuse the computer a bit.


if it stays stable, adjust the FSB in your bios to match what you got using clockgen.

also you can consider upping voltages for your cpu and memory, then try overclocking more
Erm how do I do this?

Just fiddled around with this on my Intel Xeon 2.8GHz, but I haven;t a clue how you actually up the FSB through clockgen, or am I missing something?

I've never overclocked, so I'm probably just being stupid.
This

:above:

Also - how safe is that nvidia overclocking jobbie? I've got a glacier 6600GT much like WEY's, so will the big fan on that let me overclock a worthwhile amount?
Dr. kitteny berk
Morbo
Morbo
Posts: 19676
Joined: December 10th, 2004, 21:53
Contact:

Post by Dr. kitteny berk »

very.

and 10% is a good thing to aim for.


there's no real "safe" overclocking numbers, all hardware will handle differently. i could stick my 7900gt to 1000mhz memory, someone else's might only be able to handle 800.


it really comes down to your hardware handling what your hardware will handle.
Lateralus
Dr Zoidberg
Dr Zoidberg
Posts: 4217
Joined: May 15th, 2005, 15:20

Post by Lateralus »

Fairymuff.

A note of warning - I was just trying to find something to monitor my CPU temp for me, but something decided it would shut down my CPU's fan so temp shot up to about 90C. I think the culprit was FreshDiagnose. I've not settled with Speedfan, but it only gives temps at that time and doesn't seem to have a function for a graph or anything.

Thankfully normal service has now been resumed and CPU is not dead.

Edit for Lies - Chart function found in Speedfan
Post Reply