5punk

Right my tech support bitches, my question is as follows:

If i leave my printer to decay without being used (or even installed) for a year or two, is it possible that the ink has dried up? And if so, is there anyway to get the bitch flowing again? Licking it maybe?

I have a Lexmark X1150 with a built in scannermeebob, and it has worked in the past. Opening the case while it tries to print reveals the colour and black ink running around as they should, and all signs are currently pointed at buying new ink

An ethanol based substance helped me once. I used a cotton bud with vodka to clean the printer heads on my Epson 880 as they had too dried up. Took some perseverance but I got there.

buy ink, you might need to use some lighter fluid on the ink-heads bit (depending on the printer) to remove crusts

Fear wrote:I used a cotton bud with vodka

This is my kind of tech support.

Dr. kitteny berk wrote:buy ink, you might need to use some lighter fluid on the ink-heads bit (depending on the printer) to remove crusts

You set fire to them?



/has nothing to add

I've used water in the past, at least on HP carts.

Distilled, or at least boiled water probably helps avoid crusty bits forming later, but I've usually done it to revive carts as a last ditch and tossed them after.

Lick it!

CIIJASIIE

or failing that: Try rebooting the cartridge

/helpful

fabyak wrote:CIIJASIIE

or failing that: Try rebooting the cartridge

/helpful

Couldn't find the right driver

I cleaned it up nice with some vodka, but its still giving me no love so i might just scrap them and start fresh. Might stick it in the dishwasher later for kicks though

cashy wrote:Might stick it in the dishwasher later for kicks though

Pictures of the <strike>aftermath</strike> results please